Genie GTH-2506 AU.3 Operator's Manual page 66

March 2018
Maintenance
A-1
Inspect the Manuals and Decals
Genie specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
Maintaining the operator's and safety manuals in good
condition is essential to proper and safe machine
operation. Manuals are included with each machine
and should be stored in the container provided in
the operator's compartment. An illegible or missing
manual will not provide safety and operational
information necessary for a proper and safe operating
conditions.
In addition, maintaining all of the safety and
instructional decals in good condition is mandatory
for proper and safe machine operation. Decals alert
operators and personnel to the many possible hazards
associated with using this machine. They also provide
users with operation and maintenance information.
An illegible decal will fail to alert personnel of a
procedure or hazard and could result in hazardous
operating conditions.
1 Check to make sure that the operator's and safety
manuals are present and complete in the storage
container in the operator's compartment.
2 Examine the pages of each manual to be sure
that they are legible and in good condition.
 Result: The operator's manual is appropriate for
the machine and all manuals are legible and in
good condition.
 Result: The operator's manual is not appropriate
for the machine or all manuals are not in good
condition or is illegible. Remove the machine
from service until the manual is replaced.
64
3 Open the operator's manual to the decals
inspection section. Carefully and thoroughly
inspect all decals on the machine for legibility
and damage.
 Result: The machine is equipped with all required
decals, and all decals are legible and in good
condition.
 Result: The machine is not equipped with all
required decals, or one or more decals are
illegible or in poor condition. Remove the
machine from service until the decals are
replaced.
4 Always return the manuals to the storage
container after use.
Note: Contact your authorized Genie distributor or
Genie Industries if replacement manuals or decals
are needed.
GTH-2506 AU.3
Second Edition - Second Printing
Part No. 57.0009.0730