Maintenance - Genie GTH-2506 AU.3 Operator's Manual

March 2018

Maintenance

Observe and Obey:
 Only routine maintenance items specified in this
manual shall be performed by the operator.
 Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be
required to perform this procedure.
Indicates that a cold engine will be
required to perform this procedure.
60
Check the Tire Pressure
Tip-over hazard. An over-inflated tire can
explode which may compromise machine
stability and cause the machine to tip over.
Tip-over hazard. The use of temporary flat tire
repair products may lead to tire failure which
could compromise machine stability and cause
the machine to tip over.
Bodily injury hazard. An over-inflated tire can
explode and may cause death or serious
injury.
Note: This procedure does not need to be
performed on machines equipped with foam-filled
tires.
1 Check each tire with an air pressure gauge.
Add air as needed.
Wheel and Tire Specifications
Tire
Rim
Wheel
Tire pressure
GTH-2506 AU.3
Second Edition - Second Printing
12-16.5
9.75x16.5
8 holes DIN 70361
4.5 bar (65 psi)
Part No. 57.0009.0730