Genie GTH-2506 AU.3 Operator's Manual page 48

March 2018
Operating Instructions Operating Instructions
Overriding the LMS
Overriding the LMS may result in the machine
overturning and cause death or serious injury
to the operator and/or by-stander.
The LMS should only be overridden when
a motion inhibited by the alarm condition is
necessary to recover the machine from a
hazardous situation.
If it is possible, unload the load at height and
reposition the telehandler for more stability.
Alternatively reduce the radius and retract the
telescopic boom before lowering the load.
 Release the joystick and function enable
button.
Turn override key switch A (Figure8).

46
Figure 9 Display primary home screen
GTH-2506 AU.3
Second Edition - Second Printing
Figure 8 Override key switch A
 LMS override is enabled when the LMS over-
ride icon appears on the home screen (item 17 on
Figure 9).
Primary Home Screen
This is the default screen displayed during opera-
tion of the machine. It displays the most relevant
information to the operator during the loading
cycle such as actual load, rated capacity, load
chart, and selected attachment (Figure9).
Load chart area (8).
This area of the displays shows the load chart
for attachment selected, the chart automatically
switches between 'ON OUTRIGGERS' and 'OFF
OUTRIGGERS'
Part No. 57.0009.0730