Genie GTH-2506 AU.3 Operator's Manual page 47

Second Edition - Second Printing
Procedure:
Start the engine;

 If login is required, use encoder wheel button
to select user name and enter 4-digit code.
If iButton feature is available, place iButton in

iButton reader.
Use only attachments directly manufactured
or recommended by Genie and whose load
charts are provided.
In the attachment selection screen, scroll

through available attachments with the encoder
wheel.
Select the attachment by pressing the encoder

button.
Acknowledge attachment selection by pressing

the button at the bottom right corner of the display.
After start up, the LMS defaults to the
previously used attachment. The boom must
be lowered before a different attachment can
be selected from the attachment selection
screen.
Before using the machine, make sure
there are no warnings or alarms on the
LMS display panel, and the name of the
attachment on the display corresponds to the
attachment being used.
Begin operation as per instructions in this

manual.
Shut Down
After the ignition is turned off, the system remains
in stand-by mode for a period of 30 minutes.
During this time, the display screen is turned off
but the system turns on when the ignition is turned
on accessories. After 30 minute stand-by time,
the system shuts down and will require a boot up
sequence when the machine is started.
Part No. 57.0009.0730
Operating Instructions
Changing Attachments
 Follow appropriate instructions from within the
manual to fit desired attachment.
Ensure the attachment us lowerd to the

ground.
Press the encoder button (3) or rotate button

(4) to go to main menu (Figure 6).
Figure 6 Display main menu
From the main menu, select menu item "work"

to display the work submenu (Figure7)
Figure 7 Display work submenu
From the "Work" submenu, select menu item:

"Attachment". The attachment selection screen
will appear.
 Scroll through the list of available attachments
using the encoder wheel.
Press the encoder wheel to select the

attachment.
Acknowledge attachment selection by

pressing the button at the bottom right corner of
the display.
GTH-2506 AU.3
March 2018
45