Genie GTH-2506 AU.3 Operator's Manual page 63

Second Edition - Second Printing
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Note: Check the oil level with the engine off and on
a level surface.
1 Check the oil level dipstick. Add oil as needed.
Deutz TD 2.9 L4, STAGE III A
Oil type SHELL RIMULA R4 L 15W-40
Diesel Fuel Requirements
Satisfactory engine performance is dependent
on the use of a good quality fuel. The use of a
good quality fuel will give the following result: long
engine life and acceptable exhaust emissions
levels.
Tank
Fuel Type
Part No. 57.0009.0730
60 L 13 gal
Diesel
GTH-2506 AU.3
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes
in oil level that might indicate the presence of
hydraulic system problems.
1 Be sure that the engine is off, the frame is
level and the boom is in the stowed position.
2 Visually inspect the sight gauge located on the
left side of the hydraulic oil tank.
 Result: The hydraulic oil level should be
halfway in the sight gauge.
3 Add oil as needed. Do not overfill.
Hydraulic oil specifications
Hydraulic Oil type
GAZPROMNEFT HYDRAULIC HDZ 46
March 2018
Maintenance
61