YASKAWA VS-616PS5 Series Programming Manual page 87

L5-02 Automatic Restart Operation Selection
Selects whether a fault contact output is activated during automatic restart.
A setting of "0" will energize the fault relay only after the number of restart attempts as
programmed in parameter L5-01 has been exhausted.
A setting of "1" will energize the fault relay upon every fault. Thus, the fault contact
will energize and then de-energize as the restart procedure is occurring.
VS-616PS5 Programming Manual
Setting Description
0 No fault relay (factory default).
1 Fault relay is active.
Section L: Protection Parameters
L5 Fault Reset
B
87