YASKAWA VS-616PS5 Series Programming Manual page 80

Section H: Control Circuit Terminal Parameters
H5 Modbus Communication Parameters
H Control Circuit Terminal Parameters
H5 Modbus Communication Parameters
The inverter uses communication port 6CN to communicate via MODBUS protocol.
H5-01 Serial Communication Station Address
Setting Range: 0 to 1F
Factory Default:1F
Selects a station address for identification of the inverter during serial communica-
tion.
H5-02 Serial Communication Baud Rate
Selects the baud rate at which the inverter serially communicates with external
devices.
H5-03 Serial Communication Parity Selection
Selects the transmission parity for the 6CN MODBUS port.
80
Setting
0 1200 Baud per Second
1 2400 Baud per Second
2 4800 Baud per Second
3 9600 Baud per Second (factory default)
4 19200 Baud
<1110>
Setting
0 No parity (factory default)
1 Even parity
2 Odd parity
Description
Description
VS-616PS5 Programming Manual
A
A
A