Olympus BF-UC180F Instructions Manual page 47

Chapter 3 Preparation and Inspection
Connection of the endoscope and ultrasonic cable
Mark B
Mark A
40
The electrical contacts inside the ultrasonic connector have
sharp tips and may be damaged by handling. Do not touch
the electrical contacts.
For more information on combining the endoscope with the
ultrasonic cable, refer to the "System chart" in the Appendix.
1.
Make sure that the inside of the ultrasonic connector is dry and free of
debris.
2.
Align the mark on the ultrasonic cable with mark A on the ultrasonic
connector and push it until it stops (see Figure 3.17).
3.
Turn the endoscope-side connector of the ultrasonic cable clockwise until it
stops (see Figure 3.17).
4.
Confirm that the mark on the ultrasonic cable is aligned with mark B on the
endoscope connector (see Figure 3.17).
Mark
Figure 3.17
ULTRASONIC BRONCHOFIBERVIDEOSCOPE BF-UC180F
Mark B
Mark A
Mark