Olympus BF-UC180F Instructions Manual page 46

4.
Align the mark on the videoscope cable with mark 1 on the endoscope
connector and push the cable in until it stops (see Figure 3.15).
Mark 1 (yellow)
Figure 3.15
5.
Turn the connector of the videoscope cable clockwise until it stops (see
Figure 3.15).
6.
Confirm that the mark on the videoscope cable is aligned with mark 2 on the
endoscope connector.
7.
Connect the suction tube from the suction pump to the suction connector on
the suction valve (see Figure 3.16).
Suction connector
Figure 3.16
ULTRASONIC BRONCHOFIBERVIDEOSCOPE BF-UC180F
Mark (yellow)
Suction tube
Chapter 3 Preparation and Inspection
Mark 2 (yellow)
Suction pump
39