Drive-Cliq Coupling; Description; Safety Information; Interface Description - Siemens SINAMICS S110 Manual
Hide thumbs
Also See for SINAMICS S110:
- List manual (1288 pages) ,
- Function manual (714 pages) ,
- Getting started (28 pages)
Table of Contents
Advertisement
Accessories
9.2 DRIVE-CLiQ coupling
9.2
DRIVE-CLiQ coupling
9.2.1
Description
The DRIVE-CLiQ coupling is used to connect 2 DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to EN 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
9.2.2
Safety Information
NOTICE
Damage caused by the use of incorrect DRIVE-CLiQ cables
The use of incorrect or not released DRIVE-CLiQ cables can cause damage or functional
faults to devices or the system.
• Use only appropriate DRIVE-CLiQ cables that have been approved by Siemens for the
9.2.3
Interface description
9.2.3.1
Overview
①
②
Figure 9-10
220
use case in question.
Rating plate
Protective cap, Yamaichi, Article No.: Y-ConAS-24-S
Interface overview, DRIVE-CLiQ coupling
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
Advertisement
Table of Contents
