Siemens SINAMICS S110 Manual page 180

Supplementary system components and encoder system integration
8.2 Sensor Module Cabinet-Mounted SMC10
Figure 8-6
To check as shown in the figure above, the impedances Z
and R2 with short-circuited or open outputs) from the encoder manufacturer's data sheet
must be used.
180
Rotor impedances that can be connected with excitation frequency f = 5000 Hz
or Z (impedance between R1
rs ro
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5