Siemens SINAMICS S110 Manual page 169

3. To remove the blanking cover, press the latching cams of
the cover together simultaneously and pull the cover straight
out.
Note
The BOP20 may be inserted into or withdrawn from the Control Unit while the Control Unit is
in operation.
Removal
1. Press the latching cams of the BOP20 together simultaneously.
2. Keep the latching cams pressed together and pull the BOP20 straight out.
3. Insert the blanking cover.
Displays and operator controls of the BOP20
You will find information on the displays and operator controls of the BOP20 in the
SINAMICS S110 Function Manual.
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
Supplementary system components and encoder system integration
4. Press the latching cams on the BOP20 together simulta-
neously and push the BOP20 straight into the housing of the
CU305 until you hear it latch into position.
8.1 Basic Operator Panel BOP20
169