Siemens SINAMICS S110 Manual page 217
Hide thumbs
Also See for SINAMICS S110:
- List manual (1288 pages) ,
- Function manual (714 pages) ,
- Getting started (28 pages)
Table of Contents
Advertisement
Installation
1. Insert the DRIVE CLiQ cabinet bushing from the outside of the control cabinet through the
cutout in the control cabinet.
2. Attach the DRIVE-CLiQ cabinet bushing to the outer control cabinet panel using 2 M3
screws and 2 nuts. In order to ensure good electromagnetic compatibility, a good
electrical connection must be established between the DRIVE-CLiQ cabinet gland and
the cabinet panel over a large surface area.
①
②
③
Figure 9-6
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
Control cabinet panel
M3 screw, tightening torque 0.8 Nm
DRIVE-CLiQ cabinet bushing
Installing the DRIVE-CLiQ cabinet bushing for cables with DRIVE-CLiQ connectors
Accessories
9.1 DRIVE-CLiQ cabinet bushing
217
Advertisement
Table of Contents
