Initialization Of The Screen Data - Omron NT30 Operation Manual

Initializing Memory

3-4-1 Initialization of the Screen Data

Initialization by Using the System Menu
The following memory data can be initialized.
• Image data memory
• Memory tables
• Display history
The screen data is initialized regardless of the setting for the resume function
(see page 96).
The screen data can be initialized by either of the following two methods.
• Initialization by using the System Menu
• Initialization by using the DIP switch (forced initialization)
Initialize the image data memory by following the procedure given below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
Display History
I/O Check
PT Settings
Init. Memory
[ INITIALIZE MEMORY MENU ]
Quit
Screen Memory
Memory Table
History Data
Select "Maintenance Mode."
Select "Init. Memory."
Memory Switch
Select "Screen Memory."
Section 3-4
79