Omron NT30 Operation Manual page 49

Connection to a PC by Host Link via RS-232C
DM Area Allocation (Words)
Port 1
DM32000 DM32010
DM32001 DM32011
DM32002 DM32012
DM32003 DM32013
Area). After the settings have been written, they will be enabled when the power
supply is reset, the Unit is restarted, the communications ports are restarted, or a
STUP instruction is executed.
The DM Area words that are allocated and the contents of the settings are shown
in the following table.
Setting g
Port 2
8000
0000
0007
0000
0000
Setting Contents
Host Link mode, 2 stop bits, data length: 7 bits, even parity
Baud rate: 9,600 bps
Baud rate: 19,200 bps
Send delay time: 0 ms
No CTS control; Host Link unit number: 0
Section
g
2-5
39