Omron NT30 Operation Manual page 146

Memory Tables
Characters that Can Be Displayed
S Memory Table Entries 0 to 255
During PT operation, the character string data in the character string memory
table entry is written from the PC and displayed in the screen. An initial value
can also be set when screen data is created.
Character string displaying area assigned to charac-
ter string memory table entry No. 2
Character String Memory Table
FA
OMRON
OMRON
PT
NT30C
S Memory Table Entries 256 to 999 (Read-only)
Data cannot be written to these entries by the PC. Character string data is set
when screen data is created. These memory table entries can be set not to be
used in "System Setting" ("System Memory" for DOS versions) under "PT Con-
figuration" on the NT-series Support Tool.
Character string displaying area assigned to the charac-
ter string memory table entry No. 257
Character String Memory Table
FA
OMRON
OMRON
PT
NT30C
The power of expression of the screen can be increased by giving various attrib-
utes, such as the enlarged or reverse display to the characters of the character
string memory table entry.
The character attributes are set in the edit screen when creating the screen data
by using the NT-series Support Tool.
The following characters can be displayed on the NT30/30C:
Character Dots (vertical x
type horizontal)
Half size
character
Normal size
characters
16 x 16,
Marks 32 x 32 (*),
64 x 64 (*)
No. 1
No. 2
No. 3
No. 4
:
:
No. 256
No. 257
No. 258
No. 259
:
:
Character set
Alphanumerics
8 x 8
and symbols
Alphanumerics
8 x 16
and symbols
Create by
using the
NT-series
Support Tool
Section
Can be written by the host
PC
The contents is set when
the screen is created on the
NT-series Support Tool.
Maximum number of
characters displayed on
one screen (without
overwriting)
40 characters x 30 lines
(1,200 characters)
40 characters x 15 lines
(600 characters)
4-4
137