Numeric Key Creation - Omron NT30 Operation Manual

Numeral Setting

4-8-3 Numeric Key Creation

Screen Attribute Setting
Reference
164
In order to use the numeric key type numeral setting, it is necessary to create not
only the numeral setting input column on a screen but also a numeric key for per-
forming an input operation.
A numeric key type can be selected by setting a screen attribute.
The System Keypad (Numeral Setting) of the screen attributes is specified to
System (System Keypad set to ON) or User (System Keypad set to OFF).
S Screen when System Is Specified
When a numeral setting input field is created, numeric keys are automatically
displayed.
Numeric key display position and arrangement are fixed. In this screen, only
the type of numeric key (system key) in the following page can be used.
Tank A Tank B
5000 3000
Tank C Tank D
2662 1204
Tank E Tank F
0800 0990
S Screen when User Is Specified
Display position and arrangement of the numeric key can be set freely by as-
signing to the touch switch (Refer to page 165).
Tank A Tank B
5000 3000
Tank C Tank D
2662 1204
Tank E Tank F
0800 0990
Numeric keys are created using the control keys (touch switches with the con-
trol code input function). Also, normal size characters of 0 to 9 and A to F can be
used as numeric keys with the character keys (touch switches with the charac-
ter string input function).
With the DOS version of the NT-series Support Tool, even when the Numeral
Setting of the screen attribute is User, there is still a function for automatically
creating system numeric keys. The Windows version, however, does not have
this function.
7 8 9 CLR
4 5 6
1 2 3
0 . +/–
HOME
±
CLR
7 8 9
4 5 6
1 2 3
.
0
Section 4-8