Omron NT30 Operation Manual page 114

System Maintenance
Checking the Touch Switches
Reference
Execute a touch switch check by the menu operation from the System Menu
shown below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
Display History
I/O Check
PT Settings
Init. Memory
[ I/O CHECK MENU ]
Quit
Exp. I/O Unit
Touch Switch
Communication
LCD Display
• Press a touch switch on the screen. If the touch switch is highlighted while it is
pressed, the touch switch is normally functioning.
• When the check is finished, press the 1x1 touch switch at the top right corner of
the screen. The I/O check menu will be redisplayed.
If memory switch setting for the key press sound has been made for ON, the key
press sound will be made when a touch switch is pressed. The number of
pressed touch switch will not be notified to the PC.
Select "Maintenance Mode."
Select "I/O Check."
Memory Switch
Select "Touch Switch."
Next
Buzzer
LED
Calendar
Battery
Printer
Section 3-9
This touch switch is to exit the
touch switch checking screen. Its
color is different from that of the
other switches.
The touch switch is normal if it
is highlighted while it is pressed.
105