Figure 13-5: Advanced - Loading Configuration File From A Pc On The Network; Figure 13-6: Successful Configuration File Loading; Figure 13-7: Reboot After Configuration File Load - AudioCodes MP-202 User Manual

3. In the screen section 'Load the Configuration File From a PC on the Network', click the
button 'Upgrade Now'; the screen 'Load Configuration File' opens (refer to the figure).

Figure 13-5: Advanced - Loading Configuration File from a PC on the Network

4. Enter the path of the configuration file or click 'Browse' and navigate to the
configuration file on your PC. Click 'OK'; the file starts loading from your PC to your
gateway. When loading is complete, the screen 'Successful Configuration File
Loading' opens (refer to the figure), prompting you to confirm configuration file load.
5. Click 'OK' to confirm; the upgrade process commences and shouldn't take longer than
a couple of minutes to complete. At the conclusion of the file load process, the device
automatically reboots. The new configuration file is now applied to the gateway.
Note: Do not power down the MP-202 or stop the file load process in the middle or
else the MP-202 will become inoperable.
MP-202 Telephone Adapter

Figure 13-6: Successful Configuration File Loading

Figure 13-7: Reboot After Configuration File Load

168
User's Manual
Document #: LTRT-50605