Q3: Why Can't I Access The Mp-20X Web Interface While Connected To The Wan; Q4: Why Can't I Ping Mp-20X; Q5: How Do I Ping/Trace Route From Mp-20X To Other Devices In The Network; Figure 2: Enabling Remote Administration (Wan) In The Remote Administration Screen - AudioCodes MP-20 Series Frequently Asked Questions Manual

Q3: Why can't I access the MP-20x Web interface while connected to the WAN?
A: By default, access to the Web interface from the WAN is disabled.
To enable access from the WAN:
1. Logon to the Web interface from the LAN.
2. Access the 'Remote Administration' screen (Advanced menu > Remote Administration
icon).
3. Under the Allow Incoming Access to the Web-Management group, select the Using
Primary HTTP Port check box to enable remote connection, as shown below:

Figure 2: Enabling Remote Administration (WAN) in the Remote Administration Screen

Q4: Why can't I ping MP-20x?
A: By default, the parameter Allow Incoming ICMP Echo Requests is disabled (in the 'Remote
Administration' screen - see figure
this parameter by selecting this check box.
Q5: How do I ping/trace route from MP-20x to other devices in the network?
A: To ping/trace from MP-20x to other devices in the network, refer to LTRT-50606 MP-20x
Telephone Adapter User's Manual Ver. 2.6.2, Section 13.6, "Diagnostics".
Figure 2). Therefore, to successfully ping MP-20x, enable
Page 8
AudioCodes Customer Support