Configuring Captive Portal Authentication (Cli Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 302: Actions for VSAs (continued)
Option
loss-priority ( low | medium |
Related
Documentation

Configuring Captive Portal Authentication (CLI Procedure)

Configuring Secure Access for Captive Portal
2350
Description
high ) (Optional) Set the packet loss priority (PLP) to
both the forwarding class and loss priority.
Filtering 802.1X Supplicants Using RADIUS Server Attributes on page 2340
Understanding 802.1X and VSAs on J-EX Series Switches on page 2266
Configure captive portal authentication (hereafter referred to as captive portal) on a
J-EX Series switch so that users connected to the switch are authenticated before being
allowed to access the network. When the user requests a webpage, a login page is
displayed that requires the user to input a username and password. Upon successful
authentication, the user is allowed to continue with the original page request and
subsequent access to the network.
Before you begin, be sure you have:
Performed basic bridging and VLAN configuration on the switch. See "Example: Setting
Up Basic Bridging and a VLAN for a J-EX Series Switch" on page 1063.
Generated an SSL certificate and installed it on the switch. See "Generating SSL
Certificates to Be Used for Secure Web Access" on page 398.
Configured basic access between the J-EX Series switch and the RADIUS server. See
"Example: Connecting a RADIUS Server for 802.1X to a J-EX Series Switch" on page 2267.
Designed your captive portal login page. See "Designing a Captive Portal Authentication
Login Page on a J-EX Series Switch" on page 2351.
This topic includes the following tasks:
Configuring Secure Access for Captive Portal on page 2350
Enabling an Interface for Captive Portal on page 2351
Configuring Bypass of Captive Portal Authentication on page 2351
To configure secure access for captive portal:
Associate the security certificate with the Web server and enable HTTPS on the switch:
1.
[edit]
user@switch# set system services web-management https local-certificate
my-signed-cert
low , medium , or high . Specify