MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Regulatory CE Marking Compliance
■
■
■
■
■
■
■
■
■
■
■
■
■
MTS 2 and MTS 4 are compliant with the essential requirements in article 3 of the E.U. Directive,
1999/5/EC, "Radio Equipment and Telecommunications Terminal Equipment and the Mutual
Recognition of their Conformity (R&TTE)". This includes:
Article 3.1a: Safety, of the R&TTE directive: Verification tests performed according
to the harmonized European standard:
•
Article 3.1b: EMC, of the R&TTE directive: Verification tests performed according
to the harmonized European standards:
•
•
•
•
6802800U74-N September 2009
The Warning icon implies potential system damage if the instructions or
procedures are not carried out exactly, or if the warning is not heeded.
The Danger icon implies information that, if disregarded, may result in severe
injury or death of personnel. This is the highest level of warning.
■
■
■
■
■
■
■
■
■
■
■
■
■
EN 60950–1 Safety of information technology equipment; Part 1: General requirements.
ETSI EN 301 489-1 EMC standard for radio equipment and services; Part
1: Common technical requirements.
ETSI EN 301 489-18 EMC standard for radio equipment and services; Part 18: Specific
conditions for Terrestrial Trunked Radio (TETRA) equipment.
EN 61000-3-2 standard for Electromagnetic compatibility (EMC) -- Part 3-2: Limits – Limits
for harmonic current emissions (equipment input current up to and including 16 A per phase)
EN 61000-3-3 standard for Electromagnetic compatibility (EMC) -- Part 3-3 Limits – Limitation
of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current <=16 A per phase and not in subject to conditional connection.
This is a class A product. In a domestic environment this product may cause radio interference.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Regulatory CE Marking Compliance
■
■
■
■
■
■
xxvii