Configuring Layer2 Qos Settings; Layer2 Qos Field Descriptions; Configuring The Network Settings - Avaya E129 Administering

Configuring Layer2 QoS settings

About this task
Use the following procedure to set the VLAN parameters.
Procedure
1. Press Menu > Config > Layer2 QoS.
2. Enter the required values for each VALN parameter.
Related links
Administering through the deskphone

Layer2 QoS field descriptions

Name
802.1Q/VLAN Tag
priority value
Reset Vlan Config
Related links
Administering through the deskphone

Configuring the network settings

About this task
Use the following procedure to configure network parameters, such as the IP mode and the
Gateway IP address.
Procedure
1. Press Menu > Network Config.
2. Enter the required value for each network parameter.
3. Select Back, and press Menu.
4. To immediately bring into effect the updated values, press Reboot , else press No.
Related links
Administering through the deskphone
June 2016
on page 14
Description
The VLAN tag for the Layer2 QoS packets.
The priority value for the Layer2 QoS packets.
The option to reset the VLAN tag value.
on page 14
on page 14
Administering Avaya E129 SIP Deskphone
Comments on this document? infodev@avaya.com
Configuring Layer2 QoS settings
17