Working With Menus - Garmin G1000 Pilot's Manual

WORKING WITH MENUS

NOTE: Pressing a softkey does not display a menu
or sub-menu.
Much G1000 operation is accomplished using a menu
interface. The G1000 has a bezel-mounted dedicated
MENU key that displays a context-sensitive list of options
when pressed. This option list allows the pilot to access
additional features or make setting changes specifically
relating to the currently displayed window. There is no
all-encompassing menu. Some menus provide access to
additional sub-menus that are in turn used to view, edit,
select, and review options.
Figure 2-44 Page Menu Examples
To navigate the Page Menu Window:
Turn the FMS knob to scroll through a list of
1.
available options (a scroll bar always appears
to the right of the window when the option
list is longer than the window).
Press the ENT key to select the desired
2.
option.
3. The CLR key or the FMS knob may be pressed to
remove the menu and cancel the operation.
190-00629-00 Rev. B
AUXILIARY WINDOWS
any one time can present the following windows:
Timer/References Window
pressing the TMR/REF softkey. The Generic Timer and
No Options
Vspeed references are set using this window.
with NRST
Window
Displayed
Options with
FPL Window
Displayed
using the Timer/References Window:
Garmin G1000 Pilot's Guide for Beechcraft 58/G58
PRIMARY FLIGHT DISPLAY
The lower right area of the PFD is a shared area that at
• TIMER/REFERENCES
• NEAREST
• DIRECT-TO
• FLIGHT PLAN
• PROCEDURES
NOTE: Refer to the Aircraft Flight Manual (AFM)
for limitations.
The Timer/References Window is enabled/disabled by
Figure 2-45 Timer/References Window
The following Vspeeds and Vspeed bugs can be set
• Best glide speed reference
• Best glide speed bug (ON, OFF)
• Best angle-of-climb speed reference (V
• V bug (ON, OFF)
X
• Best rate-of-climb speed reference (V
• V bug (ON, OFF)
Y
)
X
)
Y
2-27