Garmin G1000 Pilot's Manual page 186

MULTI FUNCTION DISPLAY
Change Fields
'Change Fields' allows for the default fields of DTK
(distance) and DIS (distance) to be changed to one of the
following:
• CUM (cumulative distance)
• DIS (distance)
• DTK (desired track)
• ESA (estimated safe altitude)
• ETA (estimated time of arrival)
• ETE (estimated time enroute)
To change either the DTK or the DIS field:
1. With the Active Flight Plan Page displayed,
press the MENU key to display the Active Flight
Plan Page options window.
Turn the large FMS knob to highlight 'Change
2.
Fields' and press the ENT key.
3. Turn the large FMS knob to highlight the 'DIS'
or the 'DTK' field.
Turn the FMS knob to display a list of
4.
options.
5. Turn the FMS knob to select the desired item
and press the ENT key. Press the FMS knob to
remove the cursor.
Restore Defaults
Restore Defaults returns the 'DTK' and 'DIS' fields to
'DTK' and 'DIS'.
To restore the DTK and DIS fields on the
Active Flight Plan Page:
1. With the Active Flight Plan Page displayed,
press the MENU key to display the Active Flight
Plan Page options window.
Turn the large FMS knob to highlight 'Restore
2.
Defaults' and press the ENT key.
7-62 Garmin G1000 MFD Pilot's Guide for the Beechcraft 58/G58
Shortcuts
A number of shortcuts are available to save time when
using the Active Flight Plan Page. These shortcuts speed
the process of removing approaches, departures and
arrivals, and aid in selecting a specific flight plan leg for
navigation guidance.
On the preceding page, options to remove approaches,
departures and arrivals were introduced. This process
may also be completed using the CLR key, as described
below.
To remove an approach, departure or
arrival using the CLR key:
1. With the Active Flight Plan Page displayed,
press the small FMS knob to activate the
cursor.
Turn the large FMS knob to highlight the title
2.
for the approach, departure or arrival you wish
to delete. Titles appear in white directly above
the procedure's waypoints.
Press the CLR key to display a confirmation
3.
window. With 'OK' highlighted, press the ENT
key to remove the selected procedure.
This same process may also be used to remove
individual waypoints from the active flight plan.
To remove a waypoint using the CLR key:
1. With the Active Flight Plan Page displayed,
press the small FMS knob to activate the
cursor.
2. Turn the large FMS knob to highlight the iden-
tifier for the waypoint you wish to delete.
Press the CLR key to display a confirmation
3.
window.
4. With "OK" highlighted, press ENT to remove
the selected waypoint.
190-00629-00 Rev. B