Garmin G1000 Pilot's Manual page 310

OPTIONAL EQUIPMENT
Navigation Map Page Weather Control
Softkeys
The following softkeys control the display of NEXRAD
and XM Lightning weather products on the Navigation
Map Page:
NEXRAD – pressing the NEXRAD softkey displays
NEXRAD weather and coverage information. The
NEXRAD option is mutually exclusive with the
TOPO, TERRAIN, and STORMSCOPE options, that
is, when NEXRAD is activated, TOPO and/or
TERRAIN, and/or STORMSCOPE are turned off.
XM LTNG – pressing the XM LTNG softkey displays
XM lightning information. XM Lightning is
mutually exclusive with the STORMSCOPE
option.
To display weather data on the Navigation
Map Page:
1. Press the MAP softkey.
Press the NEXRAD or XM LTNG softkey to display
2.
the desired weather. Press the applicable
softkey again to remove weather data from
the Navigation Map Page.
Navigation Map Setup Options
The pilot can customize the display of XM weather
on the Navigation Map Page by using the Map Setup
Weather Group Options Menu. The following options are
available:
• NEXRAD DATA - Turns the display of NEXRAD data
and radar coverage on or off and selects the desired
display range.
• XM LTNG - Turns the display of XM Lightning on
or off and selects the desired display range.
9-14 Garmin G1000 Pilot's Guide for the Beechcraft 58/G58
• CELL MOVEMENT - Turns the display of storm cell
movement on or off. The Cell Movement option is
shown only when NEXRAD is turned on.
NOTE: In Figure 9-9, the Stormscope menu
options are shown only when the Stormscope
unit is installed. Stormscope is not a GDL 69A
Weather Product.
Figure 9-9 Map Setup Options
190-00629-00 Rev. B