Garmin G1000 Pilot's Manual page 183

Load an Arrival
'Load Arrival' allows a published standard terminal
arrival route (STAR) for the destination airport to be
loaded into a flight plan. It also replaces the current arrival
with a new selection. An arrival can also be loaded using
the PROC key or by pressing the LD STAR softkey.
To select an arrival for a Direct-to or flight
plan destination airport:
1. From the Active Flight Plan Page, press the
MENU key to display the Active Flight Plan Page
options.
2. Highlight the 'Load Arrival' option and press
the ENT key.
3. A window is displayed listing the available
arrivals for the destination airport. Turn the
FMS knob to select the desired arrival and
press the ENT key.
4. A second window is displayed listing available
transitions for the arrival.Turn the FMS knob to
highlight the desired transition waypoint and
press the ENT key.
5. A third window is displayed listing available
arrival runways.Turn the FMS knob to highlight
the desired runway and press the ENT key.
6. With 'LOAD' highlighted, press the ENT key.
The arrival flight plan is displayed as part of
the overall flight plan and is placed after the
enroute flight plan.
190-00629-00 Rev. B Garmin G1000 MFD Pilot's Guide for the Beechcraft 58/G58
MULTI FUNCTION DISPLAY
Figure 7-44 Selecting an Arrival
7-59