Garmin G1000 Pilot's Manual page 69

NOTE: The runway window is not displayed for
every departure. 'ALL' may appear in the runway
field, indicating that the departure procedure
applies to all runways. For airports with parallel
runways,'B' may appear at the end of the runway
designation to indicate that the departure
procedure applies to both runways.
5. Turn the FMS knob to select the desired transi-
tion, then press the ENT key.
With 'LOAD?' highlighted, press the ENT key.
6.
Activate Approach
Activate Approach allows the pilot to activate the
approach when ready to begin navigating the approach
course (cleared for the approach).
To activate the approach for a direct-to or
flight plan destination airport:
From an active flight plan, press the PROC key
1.
to display the Procedures options window.
2. Turn the large FMS knob to highlight 'Activate
Approach', then press the ENT key.
190-00629-00 Rev. B
final course segment of the approach. This option assumes
that the pilot will receive vectors to the final approach fix
(FAF) and provides guidance to intercept the final course,
before reaching the FAF.
Garmin G1000 Pilot's Guide for Beechcraft 58/G58
PRIMARY FLIGHT DISPLAY
Activate Vector-To-Final
Activate Vector-To-Final allows the pilot to activate the
To activate the approach with vectors to
final:
From an active flight plan, press the PROC key
1.
to display the Procedures options window.
2. Turn the FMS knob to highlight 'Activate Vector-
To-Final', then press the ENT key.
2-41