Garmin G1000 Pilot's Manual page 138

MULTI FUNCTION DISPLAY
Map Panning
Map panning moves the map beyond its current
limits without adjusting the map range. When the
panning function is selected by pushing in the joystick,
a panning arrow flashes on the map display. A window
also appears at the top of the map display showing the
latitude/longitude position of the pointer, the bearing and
distance to the pointer from the aircraft' s present position,
and the elevation of the land at the position of the pointer.
When the panning arrow crosses an airspace boundary,
the boundary is highlighted and airspace information
is displayed at the top of the display. The information
includes the name and class of airspace, the ceiling in feet
expressed in Mean Seal Level (MSL), and the floor in feet
MSL.
NOTE: The airspace boundary stays highlighted
for approximately four seconds before returning
to normal shading.
7-14 Garmin G1000 MFD Pilot's Guide for the Beechcraft 58/G58
To pan the map:
1. Push in the joystick to display the panning
arrow.
Move the joystick in the general direction of
2.
the desired destination to place the panning
arrow at the destination location. When the
panning arrow is placed on an object, the
name of the object is highlighted (even if the
name wasn't originally displayed on the map).
This feature applies to everything displayed
on the map except route lines. When any
map feature or object is selected on the map
display, features or objects are displayed in
the box located at the top of the display. From
here, the pilot can designate the waypoint
as the Direct-to destination. When the
panning arrow crosses an airspace boundary,
the boundary is highlighted and airspace infor-
mation is displayed at the top of the display.
3. To remove the panning arrow and return to
the present position, push in the joystick.
190-00629-00 Rev. B