Flight Instruments - Garmin G1000 Pilot's Manual

For beechcraft 58; beechcraft g58
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

2.4 FLIGHT INSTRUMENTS

AIRSPEED INDICATOR
The Airspeed Indicator displays airspeed on a rolling
number gauge using a moving tape.
Airspeed
Trend
Vector
Actual
Airspeed
Speed Ranges
Figure 2-9 Airspeed Indicator
Speed Indication
The numeric labels and major tick marks on the moving
tape are marked at intervals of 10 knots, while minor tick
marks on the moving tape are indicated in intervals of 5
knots. Speed indication starts at 20 knots, with 60 knots
of airspeed viewable at one time. The actual airspeed is
displayed inside the black pointer. The pointer remains
black until reaching never-exceed speed (V
point it turns red.
Figure 2-10 Red Pointer at V
190-00629-00 Rev. B
Speed Ranges
range strip is located on the moving tape. The colors
denote flaps operating range, normal operating range,
caution range, and never exceed speed (V
is also present for low speed awareness. Refer to the
Aircraft Flight Manual (AFM) for speed criteria.
Airspeed Trend Vector
Vspeed
References
extending up or down on the airspeed scale, located to the
V
(Blue Line)
right of the color-coded speed range strip. The end of the
YSE
trend vector displays approximately what airspeed will be
reached in six seconds if the current rate of acceleration is
V
(Red Line)
maintained. The trend vector is absent if the speed remains
MCA
constant or if any data needed to calculate airspeed is not
available due to a system failure.
True Airspeed
Box
changes to yellow to indicate a forecasted airspeed greater
than V
the Airspeed Trend Vector descends back below V
Vspeed References
V
MCA
white triangular pointer is set at the maximum flap and
landing gear extension speed.
), at which
NE
Timer/References Window (refer to the Auxiliary Windows
portion of this Flight Instruments section). When ON, the
NE
Vspeeds are displayed to the right of the airspeed scale
Garmin G1000 Pilot's Guide for Beechcraft 58/G58
PRIMARY FLIGHT DISPLAY
A color-coded (white, green, yellow, and red) speed
The Airspeed Trend Vector is a vertical, magenta line,
The color of the text within the airspeed pointer
. The color of the text reverts back to white once
NE
Black arrows with denote Glide, V
are shown with blue and red lines, respectively. A
Figure 2-11 Pointer at V
Glide, V
, and V
may be set and displayed using the
X
Y
). A red range
NE
.
NE
, and V
. V
and
X
Y
YSE
V
/V
FE
LE
/V
LE
FE
2-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents