Garmin G1000 Pilot's Manual page 249

To change COM channel spacing:
1. Select the System Setup Page.
Press the FMS knob momentarily, to activate
2.
the flashing cursor.
3. Turn the large FMS knob to highlight the
'CHANNEL SPACING' field.
Turn the FMS knob to select the desired spacing
4.
and press the ENT key.
Nearest APT
Nearest Airport defines the minimum runway length
and surface type used when determining the nine nearest
airports to display on the Nearest Airport Page. A minimum
runway length and/or surface type can be entered to
prevent airports with small runways, or runways that
are not of appropriate surface, from being displayed. The
default settings are '0 feet (or meters)' for runway length
and "any" for runway surface type. The Nearest Airport
section of the System Setup page displays the following
data:
• Nearest airport surface matching criteria (any,
hard only, hard/soft, water)
• Nearest airport minimum length matching criteria
To select Nearest airport surface matching
criteria (any, hard only, hard/soft, water):
1. Select the System Setup Page.
2. Press the FMS knob momentarily, to activate
the flashing cursor.
Turn the large FMS knob to highlight 'RNWY
3.
SURFACE' field in the 'NEAREST APT' box.
4. Turn the small FMS knob to display the options
list for the selected item.
190-00629-00 Rev. B Garmin G1000 MFD Pilot's Guide for the Beechcraft 58/G58
MULTI FUNCTION DISPLAY
5. Turn the FMS knob to highlight the new selec-
tion (any, hard only, hard/soft, water). Press
the ENT key.
To select Nearest airport minimum runway
length matching criteria:
1. Select the System Setup Page.
2. Press the FMS knob momentarily, to activate
the flashing cursor.
Turn the large FMS knob to highlight 'MIN
3.
LENGTH' field in the 'NEAREST APT' box.
4. Turn the small FMS knob to display the length
field.
Turn the small and large FMS knobs to enter a
5.
runway length (zero to 99,999 feet).
6. Press the ENT key.
7-125