Garmin G1000 Pilot's Manual page 174

MULTI FUNCTION DISPLAY
Selecting the Nearest Airport as a Direct-to
Destination
The Direct-to Page always displays the nearest airports
(from the present position) on the NRST field.
To select a nearby airport as a Direct-to
destination:
1. Press the Direct-to key.The Direct-to Page is dis-
played with the destination field highlighted.
Turn the large FMS knob to highlight the near-
2.
est airport field.
3. Turn the small FMS knob to display a window
showing up to ten nearby airports.
Continue turning the small FMS knob to scroll
4.
through the list and highlight the desired air-
port.
Press the ENT key to confirm the selected
5.
waypoint, and ENT again to activate a Direct-
to.
Shortcuts
Shortcuts are available when using the Direct-to key,
allowing the pilot to bypass the use of the FMS knobs.
Any time a waypoint field is highlighted and then the
Direct-to key is pressed, the highlighted waypoint will be
the direct-to waypoint.
The following are "candidates" for Direct-to
waypoints:
• The highlighted waypoint when map panning
with the MFD map panning pointer.
• The highlighted waypoint identifier field on any
page.
• The airport waypoint page airport when on
the airport information, arrival, departure, or
approach pages.
7-50 Garmin G1000 MFD Pilot's Guide for the Beechcraft 58/G58
• The waypoint displayed on the VOR waypoint
page.
• The waypoint displayed on the NDB waypoint
page.
• The waypoint displayed on the intersection
waypoint page.
• The waypoint displayed on the user waypoint
page.
Figure 7-33 Nearest Airport Direct-to
190-00629-00 Rev. B