Garmin G1000 Pilot's Manual page 179

To edit a flight plan:
1. Press the FPL key and turn the small FMS knob
to display the Flight Plan Catalog Page.
Press the FMS knob to activate the cursor.
2.
3. Turn the large FMS knob to highlight the
desired flight plan and press the ENT key.
4. To add a waypoint to the flight plan: Turn the
large FMS knob to select the point where the
new waypoint is to be added. (If an existing
waypoint is highlighted, the new waypoint is
placed directly in front of this waypoint.) Turn
the small and large FMS knobs to enter the
identifier of the new waypoint and press the
ENT key.
5. To delete a waypoint from the flight plan: Turn
the large FMS knob to select the waypoint
to delete and press the CLR key to display a
remove waypoint confirmation window. With
'OK' highlighted, press the ENT key to remove
the waypoint. To cancel, turn the large FMS
knob to highlight 'CANCEL' and press the ENT
key.
6. Once all changes have been made, press the
FMS knob to return to the Flight Plan Catalog
Page.
190-00629-00 Rev. B Garmin G1000 MFD Pilot's Guide for the Beechcraft 58/G58
MULTI FUNCTION DISPLAY
Activate Leg
Activate Leg selects the highlighted leg as the "active
leg" (the flight plan leg which is currently used for
navigation guidance).
To activate a flight plan along a specific
leg:
From the Active Flight Plan Page, press the FMS
1.
knob to activate the cursor and turn the large
FMS knob to highlight the desired destination
waypoint.
Press the MENU key, select the 'Activate Leg'
2.
option from the page menu and press the ENT
key.
3. A confirmation window is displayed. With
'Activate' highlighted, press the ENT key.
NOTE: The leg can also be activated by pressing
ACT LEG
the softkey.
Figure 7-38 Activate Flight Plan Leg Confirmation
7-55