Working With Menus; To Enable/Disable Stormscope Nexrad, Or Xm Lightning Data; To Pan The Map - Garmin G1000 Pilot's Manual

SUPPLEMENTAL FLIGHT DATA
To enable/disable Stormscope (optional),
NEXRAD (optional), or XM lightning
(optional) data:
Press the INSET softkey. Press the STRMSCP
1.
(optional), NEXRAD (optional), or XM LTNG
(optional) softkey to display weather informa-
tion.
2. Press the STRMSCP, NEXRAD, or XM LTNG soft-
key again to remove the weather information
from the map.
NOTE: Refer to the Multi Function Display
Optional Interface Addendum for more details
about the weather interface.

To pan the map:

NOTE: The joystick on the PFD operates indepen-
dently from the one on the MFD.
1. Push in the joystick to display the panning pointer.
This allows the pilot to move the map beyond its
current limits without adjusting the range.
Push in and move the joystick to pan the map
2.
in the general direction of the desired location.
When the pointer is placed on an object,the name
of the object is highlighted for approximately 4
seconds (even if the name was not originally
displayed on the map). This feature applies to
everything displayed on the map except for route
lines.
Push in the joystick again to cancel the panning
3.
function and return to the present position on
the map.
NOTE: The airspace boundary stays highlighted
for approximately 4 seconds before returning to
normal shading.
3-30

WORKING WITH MENUS

ing a menu interface. The G1000 has a bezel-mounted
dedicated MENU key that, when pressed, displays a con-
text-sensitive list of options. This option list allows the
pilot to access additional features or make setting changes
which specifically relate to the currently displayed win-
dow. There is no all-encompassing menu. Some menus
provide access to additional sub-menus that are in turn
used to view, edit, select and review options.
FMS knob to scroll through a list of available options (a
scroll bar always appears to the right of the window when
the option list is longer than the window) and press the
ENT key to select the desired option. The CLR key may
be pressed to remove the menu and cancel the opera-
tion. Pressing the FMS knob also removes the displayed
menu.
Figure 3.6.5 Page Menu – No Options with NRST Window Displayed
Figure 3.6.6 Page Menu – Options with FPL Window Displayed
Garmin G1000 PFD Pilot's Guide for Cessna Nav III
Much of the G1000 operation is accomplished us-
Once the Page Menu window is displayed, turn the
NOTE: Pressing the softkeys does not display a
menu or sub-menu.
190-00387-02 Rev. A