Garmin G1000 Pilot's Manual page 92

NAV/COM
To auto-tune a NAV frequency if the desired
approach is already loaded:
Press the PROC key to open the Procedures
1.
window.
2. Turn the large FMS knob to highlight the
'ACTIVATE APPROACH' menu option and
press the ENT key. The approach primary NAV
frequency becomes automatically loaded into
the standby field of the selected NAV radio.
When loading or activating an approach, the primary
NAV frequency may be loaded into the NAV tuning box by
highlighting the frequency in the Select Approach window
FMS
using the knob, then pressing the
If the system is in GPS mode when a VOR/ILS
approach is loaded or activated, the approach primary
NAV frequency is automatically loaded into the active
field of NAV1.
The NAV frequency is also automatically loaded
upon vector-to-final activation. An approach can also
be activated with the
window is open.
3-18
ENT
key.
MENU
key when the Flight Plan
Garmin G1000 Pilot's Guide for the Beechcraft 58/G58
Figure 3-30 Activating an Approach
NOTE
: When a VOR/ILS approach has been
activated in GPS mode, and the ILS CDI Capture
option is set to AUTO, the system switches to NAV
mode as the final approach course is intercepted
(within 15 nm from the FAF). See the Multi
Function Display Pilot's Guide for details.
190-00629-00 Rev. B