Garmin G1000 Pilot's Manual page 52

PRIMARY FLIGHT DISPLAY
The following Inset Map operations can be performed
independently of the MFD:
• Change zoom range
• Change declutter level
• Enable/disable traffic data
• Enable/disable topographic data
• Enable/disable terrain data
• Enable/disable weather information (optional)
• Pan map
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
2-24
Wind Vector
NAV Compass Range
Track Vector
Active Navigation Route
Traffic Icon and Scale
Map Scale
Lightning Icon (optional)
Terrain Icon
NAV Compass
Map Orientation
Figure 2-42 Inset Map
Garmin G1000 Pilot's Guide for Beechcraft 58/G58
To change the zoom range:
Turn the joystick clockwise to increase or
counterclockwise to decrease the range. Zoom
ranges from 500 feet to 2,000 nautical miles.
To change the declutter level:
Press the INSET softkey.
1.
2. Press the DCLTR softkey to remove background
map details until the desired amount of detail
is depicted. The declutter level appears above
the softkey (e.g., DCLTR-1). Refer to the Multi
10
Function Display section for more details.
9 To enable/disable traffic data:
1. Press the INSET softkey.
8
Press the TRAFFIC softkey to display Traffic
2.
7
Information Service (TIS) or Traffic Advisory
System (TAS) traffic. Traffic symbology appears
6
next to the aircraft icon and in the bottom right
corner of the map.
Press the TRAFFIC softkey again to remove data
2.
from the map.
NOTE: TIS displays traffic within seven nautical
miles from 3,000 feet below to 3,500 feet
above the requesting aircraft, and includes
location, direction, altitude, and climb/descent
information.
NOTE: Refer to the Multi Function Display section
for more details about Traffic Advisory System
(TAS).
190-00629-00 Rev. B