Approaches - Garmin G1000 Pilot's Manual

APPROACHES

ILS Approach
To fly an ILS Approach:
1. The pilot loads the Runway 29R ILS approach
for KFAT into the Flight Plan. The Pilot selects
'Vectors to Final' for the transition. Upon
being given vectors from ATC, the pilot sets
the Selected Heading and presses the HDG key.
The Autopilot turns the aircraft to the desired
heading.
1.
190-00629-00 Rev. B
Cl o vi s
V O RTA C
( CZQ )
KFAT
2.
Figure 8-27 ILS Approach to KFAT
Garmin G1000 Pilot's Guide for Beechcraft 58/G58
2. The pilot uses the Heading Select Mode to
comply with ATC vectors, as requested.
3. In preparation for the approach and at the
pilot's discretion, the pilot tunes the localizer
frequency, then selects the LOC mode on the
HSI.
4. When cleared for the approach, the pilot arms
the Approach Mode by pressing the APR key.
LOC and GS appear in the roll and pitch armed
field, respectively. The Autopilot and Flight
Director determine when to begin the turn to
intercept the final approach course.
5. From this point, the Autopilot flies the ILS. At
the Decision Height, the pilot can push the
AP DISC switch and land the aircraft, or push
the GA switch to execute a missed approach.
5.
HILAN
4.
3 .
AUTOMATIC FLIGHT
CONTROL SYSTEM
8-25