Spindle Speed S - HEIDENHAIN TNC 620 User Manual

Spindle speed S

The spindle speed S is entered in revolutions per minute (rpm) in
a TOOL CALL block. Instead, you can also define the cutting speed
Vc in m/min.
Programmed change
In the part program, you can change the spindle speed in a TOOL
CALL block by entering the spindle speed only:
Program a tool call: Press the TOOL CALL key
Ignore the dialog question for Tool number ? with
the NO ENT key
Ignore the dialog question for Working spindle
axis X/Y/Z ? with the NO ENT key
Enter the new spindle speed for the dialog
question Spindle speed S= ?, and confirm with
END, or switch via the VC soft key to entry of the
cutting speed.
Changing during program run
You can adjust the spindle speed during program run with the
spindle speed override knob S.
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Entering tool-related data
5
5.1
145