Select Pallet Table - HEIDENHAIN TNC 620 User Manual

12
Programming: Pallet editor
12.1 Pallet Management (software option)

Select pallet table

Call the file manager in the Programming and Editing or Program
Run mode: Press the PGM MGT key
Display all type .P files: Press the SELECT TYPE and SHOW ALL
soft keys
Select a pallet table with the arrow keys, or enter a new file
name to create a new table
Confirm your entry with the ENT key
Exiting the pallet file
Call the file manager: Press the PGM MGT key
Select a different type of file: Press the SELECT TYPE soft key
and the soft key for the desired file type, for example SHOW.H
Select the desired file
Run pallet file
MP7683 defines whether the pallet table is to be
executed blockwise or continuously.
Use the screen layout button to switch between
table view and form view.
Select the file manager in the Program Run, Full Sequence or
Program Run, Single Block operating modes: Press the PGM
MGT key
Display all type .P files: Press the SELECT TYPE and SHOW P .
soft keys
Select the pallet table with the arrow keys and confirm with
ENT
Execute the pallet table: Press the NC start key
400
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013