HEIDENHAIN TNC 620 User Manual page 531

User functions
Programming aids
Teach-In
Test run graphics
Display modes
Programming graphics
Program Run graphics
Display modes
Machining time
Returning to the contour
Datum tables
Touch probe cycles
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
■
Calculator
■
Complete list of all current error messages
■
Context-sensitive help function for error messages
■
Graphic support for the programming of cycles
■
Comment blocks in the NC program
■
Actual positions can be transferred directly into the NC program
x Graphic simulation before program run, even while another program is
being run
x Plan view / projection in 3 planes / 3-D view / 3-D line graphic
x Magnification of details
■
In the Programming mode, the contour of the NC blocks is drawn on
screen while they are being entered (2-D pencil-trace graphics), even
while another program is running
x Graphic simulation of real-time machining in plan view / projection in 3
planes / 3-D view
■
Calculating the machining time in the Test Run mode of operation
■
Display of the current machining time in the Program Run operating
modes
■
Mid-program startup in any block in the program, returning the tool to
the calculated nominal position to continue machining
■
Program interruption, contour departure and return
■
Multiple datum tables, for storing workpiece-related datums
x Calibrate the touch probe
x Compensation of workpiece misalignment, manual or automatic
x Datum setting, manual or automatic
x Automatic workpiece measurement
x Cycles for automatic tool measurement
Technical Information
17
17.3
531