HEIDENHAIN TNC 620 User Manual page 535

KinematicsOpt software option
Touch-probe cycles for
automatic testing and
optimization of the machine
kinematics
Cross Talk Compensation (CTC) software option
Compensation of axis
couplings
Position Adaptive Control (PAC) software option
Changing control
parameters
Load Adaptive Control (LAC) software option
Dynamic changing of control
parameters
Active Chatter Control (ACC) software option (option number 145)
Fully automatic function for chatter control during machining
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
(option number 48)
■
Backup/restore active kinematics
■
Test active kinematics
■
Optimize active kinematics
(option number 141)
■
Determination of dynamically caused position deviation through axis
acceleration
■
Compensation of the TCP
(option number 142)
■
Changing of the control parameters depending on the position of the
axes in the working space
■
Changing of the control parameters depending on the speed or
acceleration of an axis
(option number 143)
■
Automatic determination of workpiece weight and frictional forces
■
Continuous adaptation of the parameters of the adaptive precontrolling
to the actual weight of the workpiece during machining
Technical Information
17
17.3
535