HEIDENHAIN TNC 620 User Manual page 149

Tool table: Standard tool data
Abbr. Inputs
T
Number by which the tool is called in the program (e.g.
5, indexed: 5.2)
NAME
Name by which the tool is called in the program (no
more than 32 characters, all capitals, no spaces)
L
Compensation value for tool length L
R
Compensation value for the tool radius R
R2
Tool radius R2 for toroid cutters (only for 3-D radius
compensation or graphical representation of a machining
operation with spherical or toroid cutters)
DL
Delta value for tool length L
DR
Delta value for tool radius R
DR2
Delta value for tool radius R2
LCUTS
Tooth length of the tool for Cycle 22
ANGLE
Maximum plunge angle of the tool for reciprocating
plunge-cut in Cycles 22 and 208
TL
Set tool lock (TL: for Tool Locked
RT
Number of a replacement tool, if available (RT: for
Replacement Tool; see also TIME2).
TIME1
Maximum tool life in minutes. This function can vary
depending on the individual machine tool. Your machine
manual provides more information
TIME2 Maximum tool life in minutes during TOOL CALL: If the
current tool life reaches or exceeds this value, the TNC
changes the tool during the next TOOL CALL (see also
CUR_TIME).
CUR_TIME
Current age of the tool in minutes: The TNC
automatically counts the current tool life (CUR_TIME: for
CURrent TIME. A starting value can be entered for used
tools
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Tool data
Dialog
-
Tool name?
Tool length?
Tool radius R?
Tool radius R2?
Tool length oversize?
Tool radius oversize?
Tool radius oversize R2?
Tooth length in the tool axis?
Maximum plunge angle?
Tool locked?
Yes = ENT / No = NO ENT
Replacement tool?
Maximum tool age?
Maximum tool age for TOOL
CALL?
Current tool age?
5
5.2
149