Checking A String Parameter - HEIDENHAIN TNC 620 User Manual

8
Programming: Q Parameters
8.11 String parameters

Checking a string parameter

The INSTR function checks whether a string parameter is contained
in another string parameter.
Select Q-parameter functions
Select the FORMULA function
Enter the number of the Q parameter in which the
TNC is to save the place at which the search text
begins. Confirm with the ENT key
Shift the soft-key row
Select the function for checking a string parameter
Enter the number of the QS parameter in which
the text to be searched for is saved. Confirm with
the ENT key
Enter the number of the QS parameter to be
searched, and confirm with the ENT key
Enter the number of the place starting from which
the TNC is to search the substring, and confirm
with the ENT key
Close the parenthetical expression with the ENT
key and confirm your entry with the END key
Remember that the first character of a text sequence
starts internally with the zeroth place.
If the TNC cannot find the required substring, it will
save the total length of the string to be searched
(counting starts at 1) in the result parameter.
If the substring is found in more than one place,
the TNC returns the first place at which it finds the
substring.
Example: Search through QS10 for the text saved in parameter
QS13. Begin the search at the third place.
37 Q50 = INSTR ( SRC_QS10 SEA_QS13 BEG2 )
292
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013