HEIDENHAIN TNC 620 User Manual page 96

3
Programming: Fundamentals, file management
3.2 Opening programs and entering
Finding any text
Select the search function: Press the FIND soft key. The TNC
displays the Find text: dialog prompt
Enter the text that you wish to find
Find the text: Press the EXECUTE soft key
Marking, copying, deleting and inserting program sections
The TNC provides certain functions for copying program sections
within an NC program or into another NC program—see the table
below.
To copy a program section, proceed as follows:
Select the soft-key row containing the marking functions
Select the first (last) block of the section you wish to copy
To mark the first (last) block, press the SELECT BLOCK soft key.
The TNC then highlights the first character of the block and the
CANCEL SELECTION soft key appears
Move the highlight to the last (first) block of the program section
you wish to copy or delete. The TNC shows the marked blocks
in a different color. You can end the marking function at any time
by pressing the CANCEL SELECTION soft key
To copy the selected program section, press the COPY BLOCK
soft key. To delete the selected section, press the DELETE
BLOCK soft key. The TNC stores the selected block
Using the arrow keys, select the block after which you wish to
insert the copied (deleted) program section
To insert the section into another program, select the
corresponding program using the file manager and
then mark the block after which you wish to insert
the copied block.
To insert the block, press the INSERT BLOCK soft key
To end the marking function, press the CANCEL SELECTION
soft key
96
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013