HEIDENHAIN TNC 620 User Manual page 536

17
Tables and overviews
17.3 Technical Information
Input format and unit of TNC functions
Positions, coordinates, circle radii, chamfer
lengths
Tool numbers
Tool names
Delta values for tool compensation
Spindle speeds
Feed rates
Dwell time in Cycle 9
Thread pitch in various cycles
Angle of spindle orientation
Angle for polar coordinates, rotation, tilting
the working plane
Polar coordinate angle for helical
interpolation (CP)
Datum numbers in Cycle 7
Scaling factor in Cycles 11 and 26
Miscellaneous functions M
Q parameter numbers
Q parameter values
Surface-normal vectors N and T with 3-D
compensation
Labels (LBL) for program jumps
Labels (LBL) for program jumps
Number of program section repeats REP
Error number with Q parameter function
FN14
536
-99 999.9999 to +99 999.9999
(5, 4: places before the decimal point, places after the
decimal point) [mm]
0 to 32 767 .9 (5, 1)
16 characters, enclosed by quotation marks with
CALL. Permitted special characters: #, $, %, &, -
–99.9999 to +99.9999 (2, 4) [mm]
0 to 99 999.999 (5, 3) [rpm]
0 to 99 999.999 (5.3) [mm/min] or [mm/tooth] or [mm/rev]
0 to 3600.000 (4, 3) [s]
–99.9999 to +99.9999 (2, 4) [mm]
0 to 360.0000 (3, 4) [°]
–360.0000 to 360.0000 (3, 4) [°]
-5 400.0000 to 5 400.0000 (4, 4) [°]
0 to 2999 (4, 0)
0.000001 to 99.999999 (2, 6)
0 to 999 (4, 0)
0 to 1999 (4, 0)
–99 999.9999 to +99 999.9999 (9, 6)
–9.99999999 to +9.99999999 (1, 8)
0 to 999 (5, 0)
Any text string in quotes ("")
1 to 65 534 (5, 0)
0 to 1199 (4, 0)
HEIDENHAIN Conversational Programming | 5/2013
TOOL
TNC 620 | User's Manual