Setting The Sewing Foot Lifting Height - Dürkopp Adler 867 Service Instructions Manual

Fig. 46: Setting presser foot pressure
Setting steps
1. Turn the adjusting wheel for the sewing foot pressure (1):

12.4 Setting the sewing foot lifting height

When the pedal is pressed back halfway, the sewing feet can be raised
during sewing, e.g. to move the material being sewn.
When the pedal is pressed completely back, the sewing feet will be raised
after the thread is cut so that the material being sewn can be exchanged.
Proper setting
The distance between the raised sewing feet and the throat plate is preset
to 25 mm on delivery.
64
(1) - Adjusting wheel for the sewing foot pressure
• Clockwise: more pressure
• Counter-clockwise: less pressure
WARNING
Risk of injury
The sewing machine must remain switched on so
that the sewing feet can be raised.
Work very carefully when you check and set the lift-
ing height for the sewing feet.
Do not put your hands under the sewing feet when
they are being lowered.
Sewing feet
Service Instructions 867 - 03.0 - 10/2017