64
5.4.8
Setting the Sewing foot lift parameter (Foot)
The sewing foot lift can have various settings. Possible settings
and the corresponding value ranges are listed in the table.
Menu item
FL AtStop,
Sewing foot lift when
sewing stops
FL AfterTrim,
Sewing foot lift after
thread cutting
FL ht.AtStop,
High sewing foot lift
when sewing stops
FL ht.A.Trim,
High sewing foot lift
after thread cutting
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
Setting option
ON = on
OFF = off
ON = on
OFF = off
Value range 00 – 20 [mm]
(depending on subclass)
Value range 00 – 20 [mm]
(depending on subclass)
Programming