Activating The Tensioner Lift - Dürkopp Adler 867 Service Instructions Manual

21 Activating the tensioner lift

The factory setting for the machine is such that the tensioner will remain
closed during a seam regardless of whether the sewing feet are lifted
or not.
Opening the tensioner while the sewing feet are lifted and the seam is
not yet completed makes sense, for instance, when you DO NOT sew
corners.
To activate the tensioner lift:
1. Press the
 You are on the technician level.
2. Use the buttons under the display to select the parameter t 09 00.
3. Use +/- to enter the desired value ( Parameter list 867).
4. Confirm with
112
NOTICE
Production of loose stitches!
When sewing corners with active tensioner lift and simultaneous
sewing foot lift, the machine will produce a loose stitch.
Do not activate the pneumatic tensioner lift when lifting the sewing
feet unless the sewing feet are NOT lifted during the seam.
and
.
Activating the tensioner lift
buttons at the same time.
Service Instructions 867 - 03.0 - 10/2017