Machines With Moving Binder - Dürkopp Adler 867 Service Instructions Manual

20.2 Machines with moving binder

Sewing machines with a moving binder allow the edge of the sewing ma-
terial to be bound simultaneously.
Proper setting
The binder (1) operates in sync with the feed. You can use the
Plus/Minus buttons to adjust the binder for more width or less
feed.
Fig. 90: Adjusting the binder
Basic setting for synchronous operation
1. Set the handwheel to 100°.
 The shaft (2) must be parallel to the lower shaft (3).
2. Remove the shaft (2).
108
WARNING
Risk of injury
Risk of crushing injuries and stab wounds from mov-
ing and sharp parts.
Switch off the sewing machine before setting the
binder.
(1) - Binder
(2) - Shaft
(3) - Lower shaft
① ②
④
⑤
⑥
(4) - Lever
(5) - Clamping spring
(6) - Screw
Service Instructions 867 - 03.0 - 10/2017
Special machines
③