Machines with integrated motor
Attaching
Fig. 80: Attaching the encoder
the encoder
1. Push the encoder (2) and encoder disc (1) onto the shaft.
2. Align the encoder disc (1) such that it runs in the middle of the
3. Screw the encoder disc (1) and encoder (2) firmly in place.
4. Tighten the retaining plate (2).
5. Insert plugs L1, L2, and L3 (5).
6. Insert the encoder plug (4).
Attaching
Fig. 81: Attaching the cover
the cover
Service Instructions 867 - 03.0 - 10/2017
①
②
③
④
⑤
(1) - Encoder disc
(2) - Encoder
(3) - Retaining plate
encoder (2).
①
②
③
④
(1) - Screws
(2) - Upper cover
(3) - Dial
(4) - Encoder plug
(5) - Plugs L1, L2, L3
⑤
(4) - Screws
(5) - Lower cover
(depending on machine)
101